Nigeria Yellow Pages Online
Home » Products »  GAT Nano Car Glass Sealant - Car Care Additive - GHANIM TRADING LLC. UAE

GAT Nano Car Glass Sealant - Car Care Additive - GHANIM TRADING LLC. UAE

Add Review
Price : On Request


GT

Application 
Clean first the surfaces to be sealed. All visible contamination must be removed thoroughly, see that the border areas are also cleaned. The procedure must be done in a dry place without direct sunlight. The temperature should be between 15°C and 25°C. pre-cleaner - Shake the bottle and cut the top of the cap. Apply the pre-cleaner with a paper tissue on the surface to be sealed and polish well after drying. The pre-cleaner creates a film on the glass. Repeat the cleaning procedure, also partially if necessary, until this film does not tear or crack any longer. Afterwards let the polished surface dry for 5 minutes and polish again until all residues are removed. Residues on paint or rubber parts can be easily removed with water. Attention! Don’t touch the cleaned surface with the hands. mixing - Fill Component 2 with the Component 1 in the mix bottle, close the bottle well and shake for 2 minutes. Attention! The sealant must be used after mixing within 24 hours. application - Cut the top of the cap of “Component 1“ and apply the sealant starting from the top using one of the enclosed tissues. The best is to start the application from the top. Split large surfaces such as windscreens and apply the sealant in two steps. polishing - Start the polishing immediately after application. Polish the surface with the second tissue until all smears are removed. Already dried smears can be removed with the still-wet sealant tissue.
Description 
Nano Sealants consist of smallest particles that create a very thin, glassy and extreme plain film.

Benefits 
The sealant film protects the material long-lasting against harmful environmental influences and is resistant against water and dirt.
  • Product Details
  • Brand : GT
  • Place of Origin : Germany
  • FOB Price : On Request
  • Minimum Order Quantity : Not Given
  • Supply Ability :
  • Packaging & Delivery
  • Packaging Detail : Not Given
  • Delivery Detail : Not Given
Application 
Clean first the surfaces to be sealed. All visible contamination must be removed thoroughly, see that the border areas are also cleaned. The procedure must be done in a dry place without direct sunlight. The temperature should be between 15°C and 25°C. pre-cleaner - Shake the bottle and cut the top of the cap. Apply the pre-cleaner with a paper tissue on the surface to be sealed and polish well after drying. The pre-cleaner creates a film on the glass. Repeat the cleaning procedure, also partially if necessary, until this film does not tear or crack any longer. Afterwards let the polished surface dry for 5 minutes and polish again until all residues are removed. Residues on paint or rubber parts can be easily removed with water. Attention! Don’t touch the cleaned surface with the hands. mixing - Fill Component 2 with the Component 1 in the mix bottle, close the bottle well and shake for 2 minutes. Attention! The sealant must be used after mixing within