Alkalinity Control 25 Ltrs

Item Code: RXSOL-50-5002-025

Concentrated liquid alkaline product for corrosion and Calcium scale control in boilers. very usefull Concentrated Alkaline Liquid For Maintaining Ph.

Other Valuable Product1)Safe Acid Descalex 20 kgsuperior , heavy duty, POWDER acid containing accelerators, corrosion inhibitors & wetting agents . Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc.Part No: RXSOL-40-1008-020.2)Wall Wash Kit SuperThe RXSOL Wall Wash Test Kit is a complete test kit for performing a hydrocarbon test, PTT time test, chloride test, pH test, a acid wash color test and stainless steel passivation test.Part NO:RXSOL-63-6105-001.3)SODA ASH 25 KgCorrect your pool’s pH or Total Alkalinity levels quickly and safely with our Soda Ash buckets. Available in multiple sizes. Dosage: 6 oz per 10,000 gallons. Dosage: 6 oz per 10,000 gallons.Part NO:RXSOL-19-1307-025.4)pH Minus Dry AcidDry Acid, is a granular form of acid and it used to lower pH, maintain balanced water, and total alkalinity in swimming pools and spas/hot tubs.Our Dry Acid buckets include a granular form of acid that helps lower pH, maintain balanced water, and total alkalinity in your pool or spa. This granular form of acid is safer and less caustic than muriatic acid. Being in this form also eliminates spilling or splashing so it’s safer and easier to use. Dry Acid quickly dissolves to start sanitizing on the spot. Use this Dry Acid for a mess-free option to keep your water maintained and balanced properly.Part No:RXSOL-19-1556-025.5)A. Guide Line Manual for BoilerThe primary function of a boiler is to transfer heat from hot gases generated by the combustion of fuel into water until it becomes hot or turns to steam. The steam or hot water can then be used in building or facility processes.Except for a small number of specialty models, boilers generally fit into one of the two common categories: fire-tube boilers and water-tube boilers. Fire-tube boilers pass hot combustion gases through tubes submerged in water. Water-tube boilers, on the other hand, circulate water inside the tubes in a closed vessel filled with hot combustions gases. In either category the boiler feedwater and fuel often contain impurities, which impairs boiler operation and efficiency. Chemical additives can be used to correct the problems caused by these impurities. To improve feedwater quality, fuel oil condition, and steam purity, these chemicals can be injected directly into the feedwater, steam or fuel oil.Part NO:RXSOL-50-5009-1006)Demineralised WaterExtremely high quality. It is produced by means specialist piece of equipment to produce it called a demineralisation plant or a deionisation plant. After completion of chemical treatment .The incoming water passes over a series of SPECIALIZED RESIN BEADS which remove mineral ions and other impurities from the water. This is why Demineralised Water is also known as Deionised Water; the process removes minerals and ions leaving water which is de-mineralised or de-ionised. Demineralised Water is also known as Demin Water, DI Water and DIW.Part No:RXSOL-20-2204-210.