IQS900 204-900-000-011 signal conditioner Meggitt Vibro-Meter

IQS900 204-900-000-011 signal conditioner Meggitt Vibro-Meter

NEW AND ORIGIN ITEM IN STOCK

WITH ONE YEAR WARRANTY 

Hope anyone enquire from us,pls click this [email] lower your support costs 2, Provide on-going availability of automation replacement parts  Quantity available: 1 Warranty: 12 months. Lead time: 1-2 working days.Terms of payment:T/T and Western Union.Courier partners: DHL, UPS, TNT, FedEx and EMS.Technical specification, manuals and data sheets

SPECIFICATIONS:

IQS900 signal conditionerCurrent output (2-wire signal transmission)Current at min. / max. gap : −15.5 mA / −20.5 mAMeasurement range : 5 mA (corresponding to 2 or 4 mm)Output sensitivity : See Operation on page 3 and IQS900 signal conditioner onpage 18Nominal output signal• Without diagnostics : −15.5 to −20.5 mA• With diagnostics : −15.5 to −20.5 mA indicates normal operation.Other current values (>−15.5 or 60 kΩ.Note: Recommended monitoring system input impedance: ≤350 Ω.

Notes 1. Ordering option code A5 (“Ex”) specifies an IQS900 signal conditioner suitable for use for use in hazardous areas. • For an IQS900 signal conditioner with protection mode “Ex” located in an Ex Zone 2, the user must ensure that the IQS900 is installed in an industrial housing or enclosure that ensures a protection rating of at least IP54 (or equivalent). 2. Ordering option code C specifies an IQS900 signal conditioner either without diagnostics (C1) or with diagnostics (C2): • An IQS900 signal conditioner without diagnostics (C1) is similar to the IQS45x, which it replaces. The IQS900 is a form, fit and functionally equivalent replacement that matches or betters the measurement specifications of the IQS45x. • An IQS900 signal conditioner with diagnostics (C2) includes optional diagnostic circuitry that automatically detects and remotely indicates problems with the measurement chain (sensor, cabling and/or the IQS900 itself). An IQS900 with diagnostics is certified SIL 2 (IEC 61508) and Cat 1 PL c (ISO 13849) “by design” to more easily meet the requirements of safety-related applications. Contact Meggitt SA for further information