steel Pipe Inner Wall Special Sandblasting Equipment Shot Blasting Machine regarding steel pipe with diameter of 16~600mm, we adopts v type conveyor which have an angle with steel pipe center line, steel pipe can rotation while going forward. regarding steel pipe with diameter of 159~2800mm, we adopts roller transmission, angle between roller is adjustable, running speed and rotation speed can be adjustable with large diameter, blasting wheel adopts bottom blasting distribution, cleaning efficiency is high, result is good. shots material circulation purification system takes overflow induction controllable full multi-stage curtain winnowing splitter and special polyester core elevator conveyor, achieves shot material sorting and recycling. blasting room adopts multi-layer seal curtain which is suitable for different diameters, shot blasting, dust removal system uses impulse reversal blowing filter cartridge dust collector, dust removal is good, life is long. this equipment can be used for water, gas, mining, oil and pipe coating pretreatment, the seabed or desert gas such as duct blaster, it can improve the appearance quality of the product components and the state of the surface craft. equipment main structure and characteristics ...
Steel grit is an angular metallic abrasive produced by crushing bearing steel. steel grit is used for descaling,coating and corrosion removal, and surface etching. the angular particle shape provides a fast cleaning rate and an angular surface profile.steel grit is tempered to three different hardnesses. the hardest material, gh, is designed for use exclusivelyin air blasting equipment,stone cutting. the two softer materials, gl and gp, may also be used in centrifugal wheel blast equipment.steel grit application:steel grit blasting cleaning:steel shot and grit are used in cleaning applications for removal of loose material on metal surfaces. this type of cleaning is common in automotive industry (motor blocks, cylinder heads, etc.).steel grit stone cutting:steel grit is used in cutting hard stones, such as granite. the grit is used in large multi-blade frames which cut the blocks of granite into thin slices. sae j444 sizes:g10 g12 g14 g16 g18 g25 g40 g50 g80 g120steel grit specification:shape : angularhardness :gp:42 ~ 50hrc;gl:56 ~ 60hrc;gh:63 ~ 66hrcdensity : 7.4 g/cm3durability : >3000 timescertificate iso9001,saej444,sgschemical composition:cr 0.60-1.60%c 0.70 -1.20%mn 0.6 -1.20%si 0.40 -1.20%s ...
NIGERIA YELLOW PAGESONLINE 
